Connecting to SmartUi via Remote Verification Station

Below are the instructions on how to connect to remote verification station :

Connecting SmartUi Client to the Cloud

Note: a user name and password must be created by the SmartUi team before proceeding to the next step. Please contact SmartUi if your username has not been created.

1. 
   
   • Go to the windows start menu
   • Launch Verification station
   • 
      
2. Select “Browse from Server”
   
   • 
3. Insert the following information
   • URL: https://capture.smartuigroup.com.au
   • Tenant name : <<Please ask your SmartUi representative for the tenant name>>
   • 
4. PRESS “CONNECTION SETTINGS”
   • Insert your username and password as setup on the web interface
   • Press “Test Connection”
   • You will get a notification saying “test connection succeeded”
   • 
5. Press 
   1. OK
   2. OK
   3. OK
6. You will arrive at the following screen and the setup is complete
   
   • Installation complete.

Note:  the automatic mode of opening the first available invoice is enabled by default. you can turn this off by clicking  or Task → Automatic Task Receive. 

If you have any issues please contact [email protected]